Recently I received this handmade card from US.
Yes, everything fell off the card.
Maybe you all can share what glue you use and how to keep anything you glued attached to the card.
Recently I received this handmade card from US.
Yes, everything fell off the card.
Maybe you all can share what glue you use and how to keep anything you glued attached to the card.
I use mostly EriKeeper (wet glue/white glue), and looks like itâs been used in the card in the photo, but I have used glue stick too.
If the card gets wet or moist, itâs not safe no matter what you use.
In my opinion, glue stick is the worse, since in very cold it looses itâs stickiness, and apparently in very dry heat too. And itâs important to put the glue on the very edges on the part, so it doesnât raise.
Also, if the item is very glossy or coated, itâs more diffucult to glue.
Double sided tape is often strong, but some are so thick, you see them through, and some turn yellowish in time, or loose their stickiness.
But I think, it is not meant to last forever.
Most often I use what is near, and sometimes use a spoon or rubber roller (?) to press the glued part.
I mostly use glue sticks (+ wet glue for the edges when itâs a thicker material.) But I go over the glued parts with this tool (donât know how it is calledâŠ)
Scraper? Yes, I have one too, and I use this as well
Edit. I had to check, I got mine in a set of glue dotted sheet for photos, and itâs called spatula there.
Itâs called scraper in my set (spatula is something totally different in that set ). But I wouldnât even know how itâs called in my mother tongue⊠(so I couldnât use a translater for that word)
Itâs called âRakelâ in German.
In Chinese, that word also means scraper. Ha ha ha haćźæż
Is anyone else a fan of these adhesive rollers?
I find them much neater than wet glue or glue sticks!
Itâs really super, I love it.
I like that type, and I had a repositional version too. Leaves everything really neat
First, bravo for all the creative postcrossers. I hope I could get time to try the nice work you do. InspirationâŠ
About the adhesive rollers, Yes. So useful. I bought different types to find my favorite.
I prefer Gina K one but it is not easy to find the refills; same for the Glue glider.
I always wanted to get the Tombow one so much but I canât have it. Not all websites deliver packages to my country.
, when they do, it can be quite expensive.
Nice are the adhesive dots and squares too.
I like these the glue pens too. I donât really like the Zig one. My favorite is the Hero Arts type one; and Gina K Connect glue, this last I donât have left, it is out of stock on the website I use to buy it.
The Quickie glue I donât use much. Nuvo one I did to try yet. I donât really use glue stick.
Oh wow! I love how methodical and thorough you are in your testing â this is amazing! I had never heard about adhesive dots and squares before, but it makes perfect sense and I can see how those would be handy for sure. Iâll keep an eye out for them!
PS - Iâve moved these few posts about glue, as we were slowly taking over the handmade topic and the theme is interesting enough to merit its own topic.
I was about to say âOwh! How is this called? I want to try it. â Then I
went to check andâŠrealized I have it in my kit I did not try yet.
Believe me, Iâm truly the absentminded one.
Thatâs even the exact same kit as I have! (Do you have the plotter? Which? Oh, I love my Silhouette Portrait!)
The glue dots and squares are so useful and of nice effect for the die cuts.
Youâre right about moving this to other topic. Thanks.
Do you mean which machine I have? Sorry for my English. I have the Silhouette Portrait 2 sinceâŠ
October 2020. Silhouette Portrait 3 has was released a week after I bought that one on the website delivering to my country.
Iâm still learning how to use all the possibilities. Only making stickers for the moment and some stuff for school. I love it too! I always wanted to try it as I found it was better to get it instead of buying some stickers on Etsy.
I use crafters tape. This one specifically. But I usually use shipping tape over the address and any written part of the card (including the front of homemade cards) to prevent anything from falling off.
I use rollers (permanent and repositionable), spray adhesive, glue dots, tacky glue, âpaperâ glue, hobby glue (like âpaperâ glue but a little thinner), double-stick tape, double-stick foam, double-stick âpinwheel filmâ that also comes in different colors. In general my uses are:
I have some Nano tape but have never used it. I would be really interested to know if anyone has experience using it on cards!
Thank you for this much detailed post with the way you use all of this, more helpful.
" double-stick tape for for sticking things to a postcardbacking (my 15-cm-wide roll is my go-to adhesive!) and for making âstickersâ " OwhâŠI never thought about using it this way. Will have to remember this.
Oh! Thank you for all of the photos.
I had never heard of âpinwheel filmâ until I was here in Germany. It is called âultrahaft windradfolieâ (âreally sticky pinwheel plasticâ) here and is very sticky on both sides. Actually, it is not permanent, but you have to really pull to get things off it. So it will last through the mail, but if someone really wanted to take your card apart, they could. I love it, because you can stick net-like things to it and then when you are done use corn starch so that any open parts arenât sticky anymore. Here is a picture of a card I made using this method.
The nano tape was a stocking-stuffer gift. It is super-cool! Try looking up nano-tape, because I canât explain it well here. It is completely clear, very sticky, thick, washable and re-usable. But despite its mega-cool qualities, I donât know if/how I can actually use it!
I use deco-foil mostly for foiling quotes I canât get printed, because it looks a bit more professional. I can print the quote out and then laminate it with the deco-foil and it looks a lot better. I also have some âopalescentâ deco foil. It looks a bit like an oil film that I mostly use to make backgrounds with the pinwheel film, because it doesnât look so great over black laser printing. I have never tried a heat pen for foiling because between printing / die-cutting and laminating Iâve been ok and my hand-work isnât so great. The tip you show in your picture looks really clunky, I think it is not your fault if you are having problems with it! And I do have a sheet of preprinted things similar to your âGina K Foil Matesâ but I havenât used it.
I have never heard of Norino. What do you use it for?